RC Hobby > Connectors

10AWG wire: 10 gauge high-strand count wire, silicone insulation, "wet noodle" style. Package has 1 meter of Red wire, & 1 meter of Black wire....

DM-XT60M: adapter to convert red "T" connector to XT60 battery connector

Genuine Deans brand 3-pin black Charging connector.Has metal pins sticking out of Both sides.Typical Polarity (see picture, going Top to Bottom):Bl...

Set of 2 (1 red & 1 black) Alligator Clips with 4mm bullet connector jacks. Can connect with crimp/solder on one arm, or by plugging into 4mm j...

HiTEC X4AC PRO: 4-channel 200 Watt AC / 300 Watt DC programmable professional charger & analyzer. Has 4 independent channels. For Li-ION, Li-PO...

Double-ended 36" R/C servo extension with 3-color 22-gauge wire.Choose connector Brand-color: (1) Futaba J style, (Connector has lip down one side;...

Set of 2 Red & 2 Black PowerPole connector housings + 4 metal pins. For R/C applications or any other High-Amp usage. Each housing is approxima...

XT60F-EC3M: adapter to convert XT60 battery to EC3 battery connector

Micro JST female connector with wire leads. This end plugs INTO a small 1S battery. Also known as Micro JST female 1.25mm, JST Micro female 1.25 PH...

Futaba Splitter Adapter. Plug your battery into the Futaba Female connector, use the short Male end to plug into Transmitter or receiver, and use t...

Ultra T Connector - Male end.  This is the Motor-Charger end. Red color Ultra T style connector, for high-amp R/C hobby applications, or any applic...

Gold Battery Bars : 10 pcs of gold-plated battery bars, used for linking A & AA-size battery cells.  Approximately 1 3/8" long, 5/16" wide.  De...

Futaba J male RC battery connector with 20AWG heavy-duty multi-strand wire with silicone insulation. Exclusively from BATTERIES AMERICA. Superior q...

SPEkF-JRM: Adapter to convert SPEkTRUM white connector to JR male connector. Handy for converting battery packs with the SPEkTRUM white "A" connect...

Futaba-style white 2-pin connector with long 10" wire leads - goes on flat (side-by-side) transmitter batteries for Conquest 4, Skysport 4, Attack,...

XT30 motor / charging connectors. Sold individually.  You would plug a battery pack INTO this connector. These are substantially smaller than the X...

XT30 battery connectors. Sold individually. This connector goes on a battery pack.

Banana Plugs. Set of 2. Can be soldered onto, OR you can use the installed screws to mechanically attach wires inside the plugs. For DC purposes, R...

Set of 2 Banana Plugs with wire leads. Plugs are 4mm, and the wires are heavy-duty silicone insulated.

Futaba Dual-Link Y Adapter. For RC on-board applications. This is a Futaba-style J-Series Dual Heavy Duty Extension; This extension comes from the ...

DM-EC3M-6: adapter to convert red "T" connector to EC3 battery end. Has 6" of heavy-gauge wire between connectors.  One end has red ultra "T" male ...

Double-ended 48" long R/C servo extension with 3-color 22-gauge wire. Choose connector Brand-color:(1) Futaba J style (connector has lip down one s...

Adaptive connector for NT8JY (Futaba) battery packs. Enables an NT8JY battery to be directly hooked up to a stand-alone charger or similar applicat...

Taranis Charging Connector: Use this Charging connector when you are smart-charging your Taranis transmitter battery externally. Add Banana Plugs t...

Deans brand Red micro polarized connector set: Set = 2 pcs. These are RED color Deans-style 2-pin connectors, with heat-resistant housings. Pieces ...

9v Snap Connector Adaptor to TAMIYA Female. Adapter for batteries with 9-volt snap connector (like the NT-8ib) to link to Chargers (such as YT-0006...

Genuine Deans brand 3-pin black connector set (SET = 2 pcs). Mating connectors; 1 for Battery pack, 1 for motor/charger. Highest quality connector,...

10 JST Male & 10 JST Female connectors with wire leads

Male RC connector - for JR-PROPO, HiTEC, & new Airtronics Z R/C. Comes with 12" of 3-color wire leads (22-gauge). Goes on Receiver battery pa...

XT60 battery end with heavy-gauge wire leads

DM-EC3B: adapter to convert red "T" connector to EC3 battery end. One end has red ultra "T" male connector; other end has EC3 (blue) battery connec...

MX2.0-2P-JSTRM: adapter for RC batteries & chargers. One end is MX2.0-2P white flat female connector, other end is JST red male connector. Good...

TAMIYA Battery-end Connector Kit. Includes housing + 2 metal bullet pins. Crimping will be required to affix a wire to the pin. This battery end i...

# JR-SPEkFBP-20 : JR-SPEkTRUM-HiTEC charging adapter with heavy-duty 20AWG wire & banana plugs (aka 4,, bullet connectors). Has JR-SPEkTRUM-HiT...

Airtronics Switch Harness. Connectors are Original Airtronics style (center position NEG(-). Goes between battery and receiver. LIMITED QTY.