Skip to content
X4AC PRO : HiTEC programmable 4-channel Charger/Analyzer

X4AC PRO : HiTEC programmable 4-channel Charger/Analyzer

$ 329.95

HiTEC X4AC PRO: 4-channel 200 Watt AC / 300 Watt DC programmable professional charger & analyzer. Has 4 independent channels. For Li-ION, Li-PO, Li-FE, Ni-Cd, Ni-MH, PB. Quickly & safely charge up to 4 battery packs at the same time! Loaded with accessories.
Note: This item has been discontinued by HiTEC; Limited Qty available. It has now been replaced by the HiTEC RDX4, which is in stock.

PRODUCT OVERVIEW:

The HiTEC X4 AC Pro AC/DC Four Port Multi-Charger for NiMH, NiCd, LiPo, LiFe, Lilon, LiHV, and Pb/Lead Acid batteries. It will charge 1-6S lithium, 1-15 cell NiMH/NiCd, and 2-20V Lead Acid batteries it capacities of 100-50,000mAh. The charger includes a universal balancing board, an XH-type balancing board, XT60 charge cable, Deans/T-type charge cable, two charge cables with bare wires (no connectors), receiver battery charge cable, DC power cord, AC power cord, and instruction manual.

Building on the popularity of our X4 AC Plus, we decided to take it up a notch with the introduction of our X4 AC Pro high-performance, microprocessor-controlled charger/discharger with extensive battery management capabilities. Capable of operating on 100-240 volts AC household current or from an 11-18 volts DC power source, this new multi-faceted powerhouse exudes a total charge circuit power of 200 watts with Power Distribution capability in AC mode and a 300-watt output when in DC mode. The X4 AC Pro allows you to connect up to four batteries of varying chemistries (NiMH/NiCd/LiPo/LiFe/Lilon/LiHV/Pb) to any of the charging channels with each channel performing independently of one another. Additional features include our "Charge Master" software, providing the unprecedented ability to operate your charger via your personal computer plus a built-in Bluetooth for Smartphone app operation. Experience the future of charging with Hitec!

FEATURES

  • Charges the following battery types
  • 1-6 cell LiPo, LiHV, LiFe and LiIon
  • 1-15 cell NiMH, NiCd
  • 2-20V Lead Acid batteries
  • Built-in Bluetooth Smart 4.0 for smart phone control with available iOS and Android apps
  • Total charge circuit power of 200 watts with Power Distribution capability in AC mode and a 300-watt output in DC mode
  • Charges or discharges up to four batteries with different chemistries at once
  • Built-in balancing ports
  • Ten battery memories per channel
  • Charge Master software allows charger operation via personal computer
  • Cooling fan
  • One year limited warranty through Hitec beginning at date of purchase

INCLUDES

Hitec X4 Pro Charger
Universal Balancing Board
XH-Type Balancing Board
XT60 Charge Cable
Deans/T-type Charge Cables
Two Charge Cables with bare wires (no connectors)
Receiver Battery Charge Cable
DC Power Cord
AC Power Cord
Instruction Manual

SPECIFICATIONS

AC Input: 100 - 240 Volts AC
DC Input: 11 - 18 Volts DC
Total Charge Circuit Power on AC Power: 200W w/Power Distribution
AC Power Distribution:
Channels A & C: 100 Watts Total
Channels B & C: 100 Watts Total
Power Distribution Adjustable Range:
Channels A & B: 50 - 100 Watts
Channels C & D: 0 - 50 Watts
Total Charge Circuit Power on DC Power:
300 Watts Total Power
Channels A & B: 100 Watts each / Channels C & D 50 Watts each
Charge Current:
Channels A & B: 0.1 - 10.0 Amps
Channels C & D: 0.1 - 5.0 Amps
Discharge Wattage: 10 Watts per Channel
Discharge Current: 0.1 - 2.0 Amps per Channel
Discharge Current for Lithium Battery Balance: 200mAh
Battery Capacity Range: 100 - 50,000mAh
Auxillary Output: 5 Volt 2.1 Amp DC USB Device Charge Port
Communication Methods;
USB Port for PC Control & Firmware Upgrades
Bluetooth 4.0 for Smartphone Apps
Dimensions: 3.8 x 7.2 x 2.8" (97 x 182 x 71mm)
Weight: 47oz (1335g)