RC Hobby > Connectors

Heavy Switch Harness, soft-mount style, with charge jack mounted on surface.   Includes mounting Hardware. There are no LED lights on this model. T...

2-Pin Flat White Connector with wire leads - goes on JR & SPEkTRUM transmitter battery packs (9.6v, 7.4v, 6.6v, and 4.8v). Use this to replace ...

Standard-size Switch Harness with 2-color 22-gauge wire, 2 male & 1 female conn (choice of Connector Brand). Each wire is approximately 5" long...

Part# Spek-JR-WhtChg.  This is a Charging Connector with wire leads, for your transmitter batteries. Use this for direct connection to your JR-2 ty...

Y-Connector, 11" long. Made with 3-color 22-gauge wire. Enables your RC receiver to power/control two servos or motor speed controllers from one ch...

HiTEC ELCO white 2-Pin connector with 6" wire leads - goes on HiTEC transmitter battery packs, etc.  Use this connector to make or repair battery p...

Sub-C size Gold Bars : 10 pcs of gold-plated battery bars, used for linking Sub-C size battery cells.  Approximately 1 3/8" long, 5/16" wide.  Desi...

LED Switch Harness - for RC receiver; has LED battery voltage indicators. Mounting hardware included. Compatible with 4.8v and 6v Rx systems. Choo...

Connector Locks : hold male & female servo/battery connectors together. Fit Futaba, JR, HiTEC, SPEkTRUM, AIRTRONICS. $ 0.49 each.

JR-SPEkTRUM-HiTEC charging adapter with banana plugs. Has JR-SPEkTRUM-HiTEC-AIRTRONICS Z female connector at one end, and banana plugs at the other...

Futaba-style Female connector with 12" 3-color wire leads (Black-Red-White). Wire is 22-gauge. Plug your battery packs INTO this connector. Use 3 c...

ELCO female: White Charging Connector for HiTEC Transmitter batteries. Plug your HiTEC battery pack (with the small square White 2-Pin connector - ...

JR-SPEkTRUM-HiTEC male connector kit: Consists of 4 pcs JR male connector housings and 12 x pins. This "male" connector goes on a battery pack. Thi...

AD-AIR-Z: adapter to convert old Airtronics connector to new JR-HiTEC-SPEkTRUM-Airtronics Z connector. Adapter has old Airtronics. female on one en...

JST Red 2-pin female connector w/ 6" wire leads for Motor/ charger/BEC circuit. This larger end is referred to as the "female" or "charge" end.  YO...

Futaba male kit: 4 pcs Futaba male connector housings & 12 pins. This "male" connector has the lip on one side; it goes on a Battery pack. You ...

JR-SPEkTRUM-HiTEC Female connector kit: Consists of 4 x JR Female connector housings and 12 x pins. This JR "Female" connector is what you plug a b...

JR-SPEkTRUM-HiTEC male RC battery connector with 20AWG heavy-duty multi-strand wire leads. Silicone insulated.  Exclusively from BATTERIES AMERICA....

JR-HiTEC-SPEkTRUM male RC battery connector with 22AWG multi-strand wire & silicone insulation. Exclusively produced by BATTERIES AMERICA. Supe...

EC3F-DF: adapter for converting EC3 to red "T" Ultra deans style connector. Connect this adapter to a battery with an EC3 connector, and it convert...

Female connector with wire leads - fits old style Airtronics RC. You plug your battery pack INTO this connector. Comes with 3-color wires (dark red...

AD-AIR-JR&HiTEC: adapter to convert old Airtronics connector to new JR-HiTEC-SPEkTRUM connector. Adapter has old Airtronics female on one end, ...

Multi-Connector (SQUID) Charging Adapter helps connect your battery pack(s) to your Charger. Has banana plugs at one end (plug into Charger); other...

2S-Bal-Ext: Balance charge extension cord for 2S LiPO, LiION, and LiFe batteries. 2S JST white connector at one end, 2S JST-XH mating connector at ...

Male Airtronics connector with wire leads - for original-style equipment. Connector has 3 nubs; comes with 3 wires, 12" length. Use for servos, rec...

JR-SPEkTRUM-HiTEC charging adapter with banana plugs. Has JR-SPEkTRUM-HiTEC-AIRTRONICS Z female connector at one end, and banana plugs at the other...

Futaba NT-8H battery connector with 8" wire leads. Fits on older Futaba NT-8H battery packs (for FG & FGK "Gold" series transmitters)

Double-ended 24" RC servo extension with 3-color 22-gauge wire. Choose Connector style: (1) Futaba J (wire color Black-Red-White)(2) JR-SPEKTRUM-Hi...

XT60F-DF: adapter to convert XT60 battery to red ultra T battery 9Deans style). Pricing is for 1 item. Picture shows both ends of the adapter. If y...

JSTWF: charging connector for 1S LiPo batteries. Includes wire leads.

Futaba female kit: 4 pcs Futaba female connector housings & 12 pins. This "female" connector is what you plug a battery INTO. You will need a c...