RC Hobby > Connectors

Double-ended 48" long R/C servo extension with 3-color 22-gauge wire. Choose connector Brand-color:(1) Futaba J style (connector has lip down one s...

Airtronics Y-Adapter , with Original Airtronics connectors. Center port is NEGATIVE. Male connector has the 3 nubs on it. Length = approx 12". Spre...

Gold Battery Bars : 10 pcs of gold-plated battery bars, used for linking A & AA-size battery cells.  Approximately 1 3/8" long, 5/16" wide.  De...

Taranis Connector: Goes on 7.2-volt Batteries for Taranis RC transmitters.

Red T (ultra) connector extension - 6" long. Female ultra connector at one end, and male ultra connector at other end. 14awg wire.

EC5 Series Adapter - combines 2 batteries with EC5 connectors and Doubles the voltage. This adapter utilizes heavy-gauge wires.

8AWG wire: 8 gauge high-strand count wire, durable silicone insulation, super flexible, "wet noodle" style. Package has 1 meter of Red wire, & ...

KYOSHO female connector with wire leads. Also knownas "mini Tamiya". Typically used for charging or motor connector. Sometimes on battery for cer...

10.9510: adapts 2 x XT60 battery packs to 1 XT60 battery connector. Voltage stays the same. The Capacity (mAh running time) DOUBLES.

SWH6272: HD Charge Switch for 7.4v Li-PO, 7.4v Li-ION, 6.6v Li-FE. Has universal connectors to fit Futaba, JR, SPEkTRUM, HiTEC, Airtronics Z, deans.

EC5 battery connector - high-amp blue connector - goes on battery. Includes housing and 2 gold-plated bullet pins.

XT60 Battery connector. For high-amp RC use. This end goes on a Battery pack. Part # XT60-B.

XT60 - high-amp connector for RC applications. This is the Motor / Charger end. Has Gold-plated bullet connections for soldering onto.

TF-BP : Tamiya female to 4mm Banana plug adaptive connector - for RC hobby motor batteries.

TM-UF : Tamiya male to red Ultra female adaptive connector - for RC hobby motor batteries. Assembled in U.S.A. by BATTERIES AMERICA.

KYOSHO male connector with wire leads. For RC hobby batteries & chargers. For some RC applications, this is the Battery end; for others, it is ...

Genuine W.S. Deans 4-pin connector.  Heat-resistant housings & gold-plated contacts. Polarized design; ensures correct connecting every time. T...

XT90 connector set.  1 Battery end and 1 motor/charge end. For high-amp RC use. The bigger housing is the motor/charging end. Smaller housing is th...

XT90 Battery connector. For high-amp RC use. This end goes on a Battery pack. Part # XT90-B.

Genuine Deans brand 3-pin battery connector. Highest quality connector, for small-to-mid size amperage motor applications. Original Deans part # 10...

Genuine W.S. Deans 4-pin battery connector.  Heat-resistant housings & gold-plated contacts. Polarized design; ensures correct connecting every...

Set of 2 insulated alligator clips (1 red and 1 black). Approximately 1 3/4" long. Crimp or solder onto lead arms.

EC5F-DF: RC hobby adapter for converting blue EC5 to red "T" Ultra style connector. Attach this adapter to a battery with an EC5 connector, and it ...

Futaba Dual-Link Y Adapter. For RC on-board applications. This is a Futaba-style J-Series Dual Heavy Duty Extension; This extension comes from the ...

Genuine Deans brand 3-pin black battery connector.  Goes on the battery pack. Highest quality connector, for small-to-mid size amperage motor appli...

EC3 Connector Sets in Bulk for RC. Pkg has 100 connectors total:50 Male blue housings & 100 Gold-plated pins. (Battery end)50 Female blue housi...

2S Balance connector. Goes on 2-cell Li-ion / Li-PO / Li-FE battery packs. Includes wire leads for connecting/splicing to battery.

JRF-FM: JR female to Futaba Male adaptive connector. Converts JR battery pack to Futaba Battery Pack. Length of wire = approx. 3 inches. These are ...

FF-JRM: Futaba Female to JR male adaptive connector. Converts Futaba battery pack to JR-SPEkTRUM-HiTEC Battery Pack. Length of wire = approx. 3 inc...

Red T (ultra) connector extension - 9" long. Female ultra connector at one end, and male ultra connector at other end. 14awg wire.

EC5 Parallel Adapter: Combines 2 batteries and Doubles the Capacity. Net Voltage remains the same.  Example: Hook up two 7.2 volt batteries, and yo...

9-volt style connector-adaptor : for connecting to battery packs, and for connecting to 9-volt batteries. Has 9v snaps at one end, and wire leads (...

JST Paralink Y-connector. For linking JST batteries in parallel (capacity doubles, voltage stays the same).

EC3 charger/motor connector with 8" of heavy-gauge red & black wires. Hand-assembled in the USA.