RC Hobby > Connectors

Futaba-style white 2-pin connector with long 10" wire leads - goes on flat (side-by-side) transmitter batteries for Conquest 4, Skysport 4, Attack,...

XT30 motor / charging connectors. Sold individually.  You would plug a battery pack INTO this connector. These are substantially smaller than the X...

XT30 battery connectors. Sold individually. This connector goes on a battery pack.

Banana Plugs. Set of 2. Can be soldered onto, OR you can use the installed screws to mechanically attach wires inside the plugs. For DC purposes, R...

Set of 2 Banana Plugs with wire leads. Plugs are 4mm, and the wires are heavy-duty silicone insulated.

Futaba Dual-Link Y Adapter. For RC on-board applications. This is a Futaba-style J-Series Dual Heavy Duty Extension; This extension comes from the ...

DM-EC3M-6: adapter to convert red "T" connector to EC3 battery end. Has 6" of heavy-gauge wire between connectors.  One end has red ultra "T" male ...

Double-ended 48" long R/C servo extension with 3-color 22-gauge wire. Choose connector Brand-color:(1) Futaba J style (connector has lip down one s...

Adaptive connector for NT8JY (Futaba) battery packs. Enables an NT8JY battery to be directly hooked up to a stand-alone charger or similar applicat...

Taranis Charging Connector: Use this Charging connector when you are smart-charging your Taranis transmitter battery externally. Add Banana Plugs t...

Deans brand Red micro polarized connector set: Set = 2 pcs. These are RED color Deans-style 2-pin connectors, with heat-resistant housings. Pieces ...

9v Snap Connector Adaptor to TAMIYA Female. Adapter for batteries with 9-volt snap connector (like the NT-8ib) to link to Chargers (such as YT-0006...

Genuine Deans brand 3-pin black connector set (SET = 2 pcs). Mating connectors; 1 for Battery pack, 1 for motor/charger. Highest quality connector,...

10 JST Male & 10 JST Female connectors with wire leads

Male RC connector - for JR-PROPO, HiTEC, & new Airtronics Z R/C. Comes with 12" of 3-color wire leads (22-gauge). Goes on Receiver battery pa...

XT60 battery end with heavy-gauge wire leads

DM-EC3B: adapter to convert red "T" connector to EC3 battery end. One end has red ultra "T" male connector; other end has EC3 (blue) battery connec...

MX2.0-2P-JSTRM: adapter for RC batteries & chargers. One end is MX2.0-2P white flat female connector, other end is JST red male connector. Good...

TAMIYA Battery-end Connector Kit. Includes housing + 2 metal bullet pins. Crimping will be required to affix a wire to the pin. This battery end i...

# JR-SPEkFBP-20 : JR-SPEkTRUM-HiTEC charging adapter with heavy-duty 20AWG wire & banana plugs (aka 4,, bullet connectors). Has JR-SPEkTRUM-HiT...

Airtronics Switch Harness. Connectors are Original Airtronics style (center position NEG(-). Goes between battery and receiver. LIMITED QTY.

Genuine Deans brand 3-pin black battery connector.  Goes on the battery pack. Highest quality connector, for small-to-mid size amperage motor appli...

Ultra T Connector - Battery end. Red color Ultra T style connector, for high-amp R/C hobby applications, or any application requiring a sure, solid...

Set of 2 alligator clips (1 red and 1 black). Approximately 1 3/8" long. Crimp or solder onto lead arms.

Ultra Series Connector - combines 2 battery packs with red T connector and DOUBLES the voltage Output.  Capacity remains same, but Voltage Doubles. 

DM-BA: Red T male connector to Banana Plugs. Approx. 8" long. Use for attaching Battery Packs with Red "T" ultra connector to a charger.

KYOSHO connector set for RC. Consists of 1 Kyosho battery end & 1 Kyosho motor end (with wire leads on each). Choose set quantity desired.

8AWG wire: 8 gauge high-strand count wire, durable silicone insulation, super flexible, "wet noodle" style. Package has 1 meter of Red wire, & ...

SWH6272: HD Charge Switch for 7.4v Li-PO, 7.4v Li-ION, 6.6v Li-FE. Has universal connectors to fit Futaba, JR, SPEkTRUM, HiTEC, Airtronics Z, deans.

EC3 Blue battery connector, pre-wired with 8" of heavy 13-gauge red & black wires.

JSTF-MX2.0-2P: adapter to convert batteries with JST red connector to the MX2.0-2P flat white connector.This adapter has a red JST Female connector...