BP-200/205si : 7.2v replacement insert for BP-200, BP-205 (for Uniden)
BP-200/205si : 7.2 volt 1100mAh replacement Ni-Cd insert - goes inside Uniden-Bearcat BP-200 & BP-205 battery pack. Also replaces BT049, BT-049 insert. Provides extended operating time.
To rebuild, you will need to remove the 2 screws on the bottom side of your battery pack. Then the 2 black plastic halves of the battery can be Carefully pulled apart. The old insert will need to be de-soldered (to detach the 2 wires connected to it), and the new insert put in its place. You will need to Confirm Polarity when attaching wires. Typically, red wire is Positive, and goes to the Positive Tab. Typically, black wire is negative, and goes to the negative tab. You will need to insulate any exposed metal parts when completing the rebuild process, to insure integrity.