BP-200/205i : 7.2 volt 700mAh replacement rechargeable Ni-Cd insert - goes inside Bearcat-Uniden BP-200 & BP-205 battery packs.
To open your BearCat-Uniden battery, remove the 2 screws on the bottom, and then carefully pull the battery case halves apart. Pull out the original insert and De-solder the wires that are connected to it. Remember to note which wire is connected to Positive (+) and which is connected to Negative(-). Slider wires onto new insert, and push the insert into the casing. Remember to insulate any exposed metal surfaces.