RC Hobby

LED Switch Harness - for RC receiver; has LED battery voltage indicators. Mounting hardware included. Compatible with 4.8v and 6v Rx systems. Choo...

Standard-size Switch Harness with 2-color 22-gauge wire, 2 male & 1 female conn (choice of Connector Brand). Each wire is approximately 5" long...

Heavy Switch Harness, soft-mount style, with charge jack mounted on surface.   Includes mounting Hardware. There are no LED lights on this model. T...

Double-ended 36" R/C servo extension with 3-color 22-gauge wire.Choose connector Brand-color: (1) Futaba J style, (Connector has lip down one side;...

Male RC connector - for JR-PROPO, HiTEC, & new Airtronics Z R/C. Comes with 12" of 3-color wire leads (22-gauge). Goes on Receiver battery pa...

Y-Connector, 11" long. Made with 3-color 22-gauge wire. Enables your RC receiver to power/control two servos or motor speed controllers from one ch...

Double-ended 24" RC servo extension with 3-color 22-gauge wire. Choose Connector style: (1) Futaba J (wire color Black-Red-White)(2) JR-SPEKTRUM-Hi...

Double-ended 18" RC servo extension with 3-color 22-gauge wire. Choose connector style: (1) Futaba J (wire color Black-Red-White)(2) JR-SPEkTRUM-Hi...

Double-ended R/C 6" servo extension with 3-color 22-guage wire. Choose connector brand-style: (1)Futaba (Black-Red-White). Connector has Lip down o...

Double-ended RC 3" servo extension, made with 3-color 22-gauge wire.Choose connector style:(1) Futaba J (wire color Black-Red-White) (2) JR-SPEkTRU...

Double-ended 12" RC servo extension with 3-color 22-gauge wire. Has male connector at one end, and Female connector at other end. Choose connector ...

JR-SPEkTRUM-HiTEC charging adapter with banana plugs. Has JR-SPEkTRUM-HiTEC-AIRTRONICS Z female connector at one end, and banana plugs at the other...

Y-Connector, 6" long. Made with 3-color 22-gauge wire. Has 1 Male connector, bridging off to 2 Female connectors. Also known as Y-Adapter. Choose c...

JR-SPEkTRUM-HiTEC-AIRTRONIC Z Female Connector with 3-color (orange, red, brown) 12" wire leads. You can plug your battery packs & servos INTO ...

ELCO female: White Charging Connector for HiTEC Transmitter batteries. Plug your HiTEC battery pack (with the small square White 2-Pin connector - ...

ACC134N: Voltage Regulator for R/C hobby applications. Input range 4.8V-8.4VDC. Designed for 5-cell NiMH, 5-Cell NiCd, 2-cell Li-ION, 2-cell LiPO, ...

10BK-3MCCAW : 6.0 volt 4000mAh eneloop READY-TO-USE rechargeable NiMH battery for R/C hobby.  The eneloop NiMH cells are PRE-CHARGE, and they retai...

Double-ended 48" long R/C servo extension with 3-color 22-gauge wire. Choose connector Brand-color:(1) Futaba J style (connector has lip down one s...

FF-JRM: Futaba Female to JR male adaptive connector. Converts Futaba battery pack to JR-SPEkTRUM-HiTEC Battery Pack. Length of wire = approx. 3 inc...

JRF-FM: JR female to Futaba Male adaptive connector. Converts JR battery pack to Futaba Battery Pack. Length of wire = approx. 3 inches. These are ...

HiTEC CG-22A Wall Charger, for European Wall Outlets. Input 220VAC. Charger output 50mA.

3-Color heavy-duty servo wire. Sold as 10-foot bundle.  22AWG, high-quality, multi-strand copper.Choose brand-color:(1) Futaba (Black-Red-White)(2)...

HiTEC 54114 NiCd: 9.6 volt 700mAh rechargeable NiCd battery for HiTEC transmitters. Fits the following HiTEC transmitters: Optic 6, Eclipse 7, Flas...

8HR-AAUW-D : 9.6 volt 1650mAH rechargeable NiMH battery for R/C, custom applications, etc.  SQUARE style (4" long x 1 1/8" x  1 1/8"; can stand up ...

ACC135: Premium Voltage Regulator for R/C hobby applications. Input range 4.8V-12VDC. Designed for regulating 5-cell NiMH, 5-Cell NiCd, 2-cell Li-I...

RCN500 : RC Battery Charger for 2-10 Series NiMH/NiCd Battery Pack (2.4V-12V) RC Car/Truck/Air Gun/Drone Battery Pack Charger with JST, XH, red T P...

JR-SPEkTRUM-HiTEC charging adapter with banana plugs. Has JR-SPEkTRUM-HiTEC-AIRTRONICS Z female connector at one end, and banana plugs at the other...

WC-Aurora-9-9x: Wall Charger for HiTEC Aurora 9 & Aurora 9x transmitters. Plugs into round CHG jack on transmitter. Charges NiCd or NiMH batter...

The Hitec RDX4 is a new four port AC/DC Charger, delivering up to 100W at 10 amps per port. Connect four batteries of various chemistries to any of...

Hitec RDX2 800 AC/DC 800W 10A 6S Battery Charger / DischargerThe RDX2 800 is the latest in Hitec’s reliable charger line, offering efficient chargi...

Hitec RDX2 200 AC/DC 200W 10A 6S Battery Charger / Discharger Capable of charging two batteries simultaneously, regardless of chemistry or capacity...

The RDX1 is an AC/DC ultra-performance microprocessor-controlled battery charger/discharger with management features suitable for all popular chemi...