RC Hobby > Adapters

Heavy Switch Harness, soft-mount style, with charge jack mounted on surface.   Includes mounting Hardware. There are no LED lights on this model. T...

Standard-size Switch Harness with 2-color 22-gauge wire, 2 male & 1 female conn (choice of Connector Brand). Each wire is approximately 5" long...

Y-Connector, 11" long. Made with 3-color 22-gauge wire. Enables your RC receiver to power/control two servos or motor speed controllers from one ch...

LED Switch Harness - for RC receiver; has LED battery voltage indicators. Mounting hardware included. Compatible with 4.8v and 6v Rx systems. Choo...

JR-SPEkTRUM-HiTEC charging adapter with banana plugs. Has JR-SPEkTRUM-HiTEC-AIRTRONICS Z female connector at one end, and banana plugs at the other...

AD-AIR-Z: adapter to convert old Airtronics connector to new JR-HiTEC-SPEkTRUM-Airtronics Z connector. Adapter has old Airtronics. female on one en...

EC3F-DF: adapter for converting EC3 to red "T" Ultra deans style connector. Connect this adapter to a battery with an EC3 connector, and it convert...

AD-AIR-JR&HiTEC: adapter to convert old Airtronics connector to new JR-HiTEC-SPEkTRUM connector. Adapter has old Airtronics female on one end, ...

Multi-Connector (SQUID) Charging Adapter helps connect your battery pack(s) to your Charger. Has banana plugs at one end (plug into Charger); other...

2S-Bal-Ext: Balance charge extension cord for 2S LiPO, LiION, and LiFe batteries. 2S JST white connector at one end, 2S JST-XH mating connector at ...

JR-SPEkTRUM-HiTEC charging adapter with banana plugs. Has JR-SPEkTRUM-HiTEC-AIRTRONICS Z female connector at one end, and banana plugs at the other...

XT60F-DF: adapter to convert XT60 battery to red ultra T battery 9Deans style). Pricing is for 1 item. Picture shows both ends of the adapter. If y...

JSTWF: charging connector for 1S LiPo batteries. Includes wire leads.

DM-XT60M: adapter to convert red "T" connector to XT60 battery connector

FF-EC3B : Adapter cable. Has Futaba J Female connector at one end, and EC3 (battery) connector at other end. Plugs into SPEkTRUM SPMXC1010 S2100 ch...

MCX-MX2.0-2P: adapter for 1S 3.7v LiPO batteries. Use with small 1S 3.7v LiPO batteries for charging, or to convert Micro JST connector to MX2.0-2P...

3S-Bal-Ext: Balance Charge extension cord for 3S LiPO (11.1v) and 3S LiFe (9.9v) batteries. Plug the balance connector of your 3S battery into one ...

HiTEC X4AC PRO: 4-channel 200 Watt AC / 300 Watt DC programmable professional charger & analyzer. Has 4 independent channels. For Li-ION, Li-PO...