RC Hobby > Adapters

Taranis Charging Connector: Use this Charging connector when you are smart-charging your Taranis transmitter battery externally. Add Banana Plugs t...

9v Snap Connector Adaptor to TAMIYA Female. Adapter for batteries with 9-volt snap connector (like the NT-8ib) to link to Chargers (such as YT-0006...

1S-CHG-12P: 1S LiPO Charge adapter for up to 12 batteries. Can parallel-charge up to 6 with micro-JST and up to 6 with mini-JST connectors. Has ba...

DM-EC3B: adapter to convert red "T" connector to EC3 battery end. One end has red ultra "T" male connector; other end has EC3 (blue) battery connec...

MX2.0-2P-JSTRM: adapter for RC batteries & chargers. One end is MX2.0-2P white flat female connector, other end is JST red male connector. Good...

# JR-SPEkFBP-20 : JR-SPEkTRUM-HiTEC charging adapter with heavy-duty 20AWG wire & banana plugs (aka 4,, bullet connectors). Has JR-SPEkTRUM-HiT...

6S-Bal-Ext: Balance charge extension for 6S LiPO, 6S LiION, 6S LiHV, and 6S LiFe batteries (22.2 volt). Length approximately 22cm. Handy for linkin...

Ultra Series Connector - combines 2 battery packs with red T connector and DOUBLES the voltage Output.  Capacity remains same, but Voltage Doubles. 

JSTF-MX2.0-2P: adapter to convert batteries with JST red connector to the MX2.0-2P flat white connector.This adapter has a red JST Female connector...

JSTF-BP : JST female connector to Banana Plugs. Use this adapter to attach battery packs with JST connector to a charger (or to a motor with Banan...

5S-Bal-Ext: Balance charge extension for 5S LiPO, 5S LiION, and 5S LiFe batteries (18.5 volt). Length approximately 22cm. Handy for linking the 5S ...

MX2.0-2P Female charging connector with wire leads. Plug your 1S LiPO batteries with the flat white wing connector (known as MX2.0-2P Positive) int...

Taranis Connector: Goes on 7.2-volt Batteries for Taranis RC transmitters.

EC5 Series Adapter - combines 2 batteries with EC5 connectors and Doubles the voltage. This adapter utilizes heavy-gauge wires.

10.9510: adapts 2 x XT60 battery packs to 1 XT60 battery connector. Voltage stays the same. The Capacity (mAh running time) DOUBLES.

JSTM-AF: RC Adaptive connector - converts SPEkTRUM-JR white connector (usually found onSPEkTRUM and JR PROPO transmitter batteries) to a red JST-GW...

FF-JSTM : Futaba Female connector to JST Male adapter connector

TM-BP: Tamiya Male connector to Banana Plugs

TF-BP : Tamiya female to 4mm Banana plug adaptive connector - for RC hobby motor batteries.

TM-PP : Tamiya male to PowerPole adaptive connector - for RC hobby motor batteries. Assembled in U.S.A. by BATTERIES AMERICA.

TM-UF : Tamiya male to red Ultra female adaptive connector - for RC hobby motor batteries. Assembled in U.S.A. by BATTERIES AMERICA.

MX2.0-2P Male battery connector with wire leads. This goes on 1S LiPO batteries. Connector is also known as MX2.0-2P Positive. Use in model buildin...

EC5F-DF: RC hobby adapter for converting blue EC5 to red "T" Ultra style connector. Attach this adapter to a battery with an EC5 connector, and it ...

Y-Connector, 24" long. Made with 3-color 22-gauge wire. Enables your RC receiver to power/control two servos or motor speed controllers from one ch...

EC5 Parallel Adapter: Combines 2 batteries and Doubles the Capacity. Net Voltage remains the same.  Example: Hook up two 7.2 volt batteries, and yo...

Ultra T Charge Cable: Red T male charging connector with banana plugs. This male Ultra T connector accepts the popular Red T Ultra (aka Deans Ultra...