Newest Products

BK-4MCCA : 1.2 volt 800mAh eneloop rechargeable AAA battery, PRE-CHARGED and READY TO USE.  These premium-quality rechargeable batteries RETAIN THE...

JR-SPEkTRUM-HiTEC-AIRTRONIC Z Female Connector with 3-color (orange, red, brown) 12" wire leads. You can plug your battery packs & servos INTO ...

Male Airtronics connector with wire leads - for original-style equipment. Connector has 3 nubs; comes with 3 wires, 12" length. Use for servos, rec...

Part# Spek-JR-WhtChg.  This is a Charging Connector with wire leads, for your transmitter batteries. Use this for direct connection to your JR-2 ty...

Female connector with wire leads - fits old style Airtronics RC. You plug your battery pack INTO this connector. Comes with 3-color wires (dark red...

JR PROPO 2-Pin Black "T" connector with wire leads - fits on JR PROPO Transmitter battery packs. Same connector as on original battery # JR-1. Use ...

ELCO female: White Charging Connector for HiTEC Transmitter batteries. Plug your HiTEC battery pack (with the small square White 2-Pin connector - ...

Futaba-style white 2-pin connector with long 10" wire leads - goes on flat (side-by-side) transmitter batteries for Conquest 4, Skysport 4, Attack,...

2-Pin Flat White Connector with wire leads - goes on JR & SPEkTRUM transmitter battery packs (9.6v, 7.4v, 6.6v, and 4.8v). Use this to replace ...

Futaba-FGK White 2-pin Connector with long 8" wire leads - goes on transmitter batteries for old Futaba FGK (Gold series) transmitters. Original ...

TAMIYA Battery-end Connector Kit. Includes housing + 2 metal bullet pins. Crimping will be required to affix a wire to the pin. This battery end i...

KYOSHO male connector with wire leads. For RC hobby batteries & chargers. For some RC applications, this is the Battery end; for others, it is ...

# JST-male. JST-GWS male red 2-pin connector with 6" wire leads. Goes on battery pack. Use on electric flight batteries and Tx batteries. This conn...

JST Red 2-pin female connector w/ 6" wire leads for Motor/ charger/BEC circuit. This larger end is referred to as the "female" or "charge" end.  YO...

CA-72 : custom Charge Adapter Cord for Yaesu-Vertex FNB-72, FNB-85, and FNB-94 style batteries. Enables you to connect your battery pack directly t...

Solder Tabs for Sub-C and C batteries - pkg of 20 pcs. Made of Nickel-Tin; easy to solder to. Tab size: 1/4" wide x 1 1/4" long.

Solder Tabs for AAA size batteries - 20 pcs. Made of Nickel-Tin; easy to solder to. Tab size: 5/32" x 11/16".

CR2032: Coin-type 3-volt Lithium Primary (non rechargeable) battery. Replaces CR2032, BR2032, and any other "2032" brand/size. Size : 20mm diameter...

Solder Tabs for AA-size batteries - 20 pcs. Made of Nickel-Tin; easy to solder to. Dimensions: 5/32" wide x 0.85" long.

CR2025: SANYO brand 3-volt Lithium Primary (non-rechargeable) battery. Available Plain, or with Solder Tabs (for connection/assembly - $2.45 extra ...

CR2016: Coin-type 3-volt Lithium Primary (non-rechargeable) cell. Typically used in memory applications. Available Plain, or with Solder Tabs, or w...

KR-1100AAU : 1.2 volt 1100mAh rechargeable Ni-Cd AA battery cell (flat top style). Battery length = 1.93". Diameter: 0.57".  Available plain or wit...

HR-3U-2500 : 1.2 volt 2500mAh High-capacity rechargeable AA Ni-MH battery cells. FDK SANYO brand cells.  Choose plain button top or w/ solder tabs ...

P-P301 : 3.6 volt 400mAh rechargeable Ni-Cd battery w/ Black connector for Cordless Phones. Replaces Panasonic battery # P-P301 and many others, su...

ACC134N: Voltage Regulator for R/C hobby applications. Input range 4.8V-8.4VDC. Designed for 5-cell NiMH, 5-Cell NiCd, 2-cell Li-ION, 2-cell LiPO, ...

The 4AAcase is a See-thru clamshell case for 4 x AA battery cells. Holds Alkalines, Ni-Cds, Ni-MHs, any AA cells. Snaps open & closed. A must-...

Heat Shrink Tube - 1/2" diameter, 1 foot length. Used for insulating exposed metal of thick wire, or for providing stress relief over wires. Cut de...

Heat Shrink Tube - 1/4" diameter, 1 foot length. Used for insulating exposed metal and wire, or for providing stress relief for wires. Cut desired ...

Heat Shrink Tube - 1/8" diameter, 1 foot length. Used for insulating exposed metal and wire, or for providing stress relief for wire. Cut desired l...