Products

Razor Battery EBWHL-6 is the perfect replacement battery for Wahl electric razor clippers and shavers. This battery is made with high quality part...

EC3 Connector Sets in Bulk for RC. NEW - with E-Z Solder Pins ! This Bulk Set contains 50 connectors:25 Male (Battery end) housings with gold-plate...

EC3 (blue) Connector - Male (Battery) end.  NEW & IMPROVED DESIGN - with E-Z Solder Pins ! This end goes on a battery pack. These newly-designe...

EC3 (blue) Connector - Female (motor-charging end).  NEW & IMPROVED DESIGN - with E-Z Solder Pins ! This end goes on the Motor wires or Charger...

EC3 Connector Sets in Bulk for RC. NEW - with E-Z Solder Pins ! This Set contains 20 connectors:10 Male (Battery end) housings with gold-plated pin...

EC3 Connector Sets in Bulk for RC. NEW - with E-Z Solder Pins ! This Set contains 10 connectors:5 Male (Battery end) housings with gold-plated pins...

EC3 Connector Set : 1 Male (Battery end) housings with gold-plated pins already installed, and 1 Female (motor/charge end) housings with gold-plate...

EC3 Connector Sets in Bulk for RC. NEW - with E-Z Solder Pins ! This Bulk Set contains 100 connectors:50 Male (Battery end) housings with gold-plat...

EC3 motor/charger end: High-amp Blue connector housing with 2 gold-plated pins. This end goes on the charger wires or motor wires. You would plug a...

EC3-BA: EC3 female connector to Banana Plugs. Approx. 8" long. For attaching battery packs with EC3 (blue) connector to chargers.

EC3B-leads : EC3 battery connector with 6" heavy-gauge wire leads. This typically goes on a battery. Red wire is POS(+) and Black wire is NEG(-).

EC3 Blue battery connector, pre-wired with 8" of heavy 13-gauge red & black wires.

EC3 charger/motor connector with 8" of heavy-gauge red & black wires. Hand-assembled in the USA.

EC3F-DF: adapter for converting EC3 to red "T" Ultra deans style connector. Connect this adapter to a battery with an EC3 connector, and it convert...

EC5 mating connector with 9" heavy gauge 14AWG Wire leads. Plug your Battery INTO this connector.  Can be attached to a charger, motor, starter, et...

EC5 Parallel Adapter: Combines 2 batteries and Doubles the Capacity. Net Voltage remains the same.  Example: Hook up two 7.2 volt batteries, and yo...

EC5 Series Adapter - combines 2 batteries with EC5 connectors and Doubles the voltage. This adapter utilizes heavy-gauge wires.

EC5 battery connector - high-amp blue connector - goes on battery. Includes housing and 2 gold-plated bullet pins.

EC5 connector - motor/charger end. Blue color, high-amp capability. Includes housing & 2 gold-plated pins. You plug your battery pack INTO t...

EC5F-DF: RC hobby adapter for converting blue EC5 to red "T" Ultra style connector. Attach this adapter to a battery with an EC5 connector, and it ...

EDH-30 : ALINCO-brand 6-cell AA battery case. Fits DJ-193, DJ-195, DJ-196, DJ-493, DJ-496, DJ-596 radios, etc. Load with 6 x AA non-rechargeable AA...

IN STOCK. EDH-34:  ALINCO-brand 6 x AA Alkaline Battery Case.  It fits such radios as DJ-V17, DJ-S17, DJ-V27T, DJ-V47T, DJ-S47, DJ-V57T, DJ-V57E, e...

No longer available. The EDH-35 is an ALINCO-brand alkaline battery case for the DJ-G7T, DJ-G7E radio.  Holds 4 x AA cells.  Handy for providing in...

EDH-36: Alkaline Battery Case for ALINCO DJ-X11, DJ-X11T, DJ-X11K, DJ-X11E handheld scanning radios (worldwide versions). Load with 3 x AA Alkaline...

EFLB6001S : 3.7v 600mAh Li-PO battery, 25C rating, with built-in PCB (circuit board). Includes JST connector. Length: 2 3/8" x 5/8" x 1/4". Weight ...

ELB B001 : 3.6 volt rechargeable NiCd battery pack for emergency lighting. Compatible with these model numbers: Lithonia EU2LED, Lithonia IPP-700AA...