Products

 WC-K45: Wall Charger for Kenwood TH-D72A, TH-D72E. Plugs into wall outlet, & plugs into Radio to slow-charge battery. Input: 100-240VAC (world...

WC-PB33: Plug-in Wall Charger for Batteries America PB-33xs, PB-33xh, PB-33xe battery. Plugs into 110-120VAC outlet; other end plugs directly into...

WC-PB34: Wall Charger for new PB-34 NiCd battery (coax plug, Center polarity Positive+). Plugs directly into charging jack on side of battery. Char...

WC-PB-38h: Wall Charger for PB-38h (7.2v Batteries America version). Input 110-120VAC 60Hz. Output: 9VDC 200mA. Plugs directly into battery pack. C...

The WC-PB39 is a custom Wall Charger that plugs directly into Batteries America brand PB-39 style battery packs (PB-39N, PB-39, PB-39H; Ni-Cd &...

WC-PR222 : Wall charger for the Batteries America brand CNB-410 battery pack (for PRYME / STANDARD / Heath radios). Charges 12V battery overnight. ...

WC-STS : Plug-in overnight Wall Charger for STS battery packs (for STS AV7600 & AV7600 AOR radios). Plugs into charge jack on bottom of battery...

WC-TR2400 : Wall Charger for Kenwood TR2400, TR-2400 radio. Plugs into side of radio to charge the battery. Polarity is center NEG(-).  Output is 1...

West Marine BP200 rebuild service.  $ 59.95  pricing consists of replacement parts & labor.Send us your West Marine BP200 battery, and we will ...

The WXAAB is a 5xAA battery case for Wouxun radios. Original model # KG-2A-1. Part code BAO-001. Load with 5 x AA cells for instant power. Fits ra...

WXHCB : 7.4volt 1700mAh Li-ION battery for Wouxun radios. Includes spring-loaded Belt Clip. Original OEM model # 1A17KG-3. Extend capacity recharge...

WY-49V : Fast Charger for 9-volt rechargeable batteries. Charges 2 or 4 at a time. Includes Wall power supply (110-120VAC in). Has built-in selec...

HiTEC X4AC PRO: 4-channel 200 Watt AC / 300 Watt DC programmable professional charger & analyzer. Has 4 independent channels. For Li-ION, Li-PO...

XB2700: 4.8 volt 1100mAh rechargeable battery pack for Shark Cordless sweeper XB2700. These are manufactured in the USA by Batteries America.  Fit...

XB2700 PLUS: 4.8 volt 2000mAh PRE-CHARGED & READY-TO-USE battery for Shark Cordless sweeper XB2700. Made with eneloop NiMH batteries.

XBT1106N : 10.8volt 3500mAh rechargeable Ni-MH battery pack for Shark vacuums. Compatible with Shark XBT1106N, SV1110, SV1106N, SV1110N, SV116N, fr...

XT30 battery connectors. Sold individually. This connector goes on a battery pack.

XT30 Charge Cable - for RC hobby batteries. Use this adapter cable to hook up your XT30 battery to your smart charger. Banana plugs go into smart c...

XT30 motor / charging connectors. Sold individually.  You would plug a battery pack INTO this connector. These are substantially smaller than the X...

XT60 Battery connector. For high-amp RC use. This end goes on a Battery pack. Part # XT60-B.

XT60-BA: XT60 female connector to Banana Plugs. Approx. 8" long. Use for attaching battery packs with XT60 (male) connector to a charger.

XT60 - high-amp connector for RC applications. This is the Motor / Charger end. Has Gold-plated bullet connections for soldering onto.

10.9510: adapts 2 x XT60 battery packs to 1 XT60 battery connector. Voltage stays the same. The Capacity (mAh running time) DOUBLES.

XT60F-DF: adapter to convert XT60 battery to red ultra T battery 9Deans style). Pricing is for 1 item. Picture shows both ends of the adapter. If y...

XT60F-EC3M: adapter to convert XT60 battery to EC3 battery connector

XT60 female connector with heavy gauge wires - for motor or charger. You plug an XT60 battery pack INTO this connector. Attach to motor or charger.

XT60M-to-JRmale adaptive connector. Wire between connectors is approximately 3" long. If your battery has an XT60 connector on it, this adapter wil...

XT60 battery end with heavy-gauge wire leads

XT60U-F :  High-amp secure battery connector for R/C. Upgraded version of the XT60 connector. For this new XT60U series, the "-F" means female; thi...

XT60U-M :  High-amp secure battery connector for R/C. Upgraded version of the XT60 connector. For this new XT60U series, the "-M" means male; this ...

XT90 connector set.  1 Battery end and 1 motor/charge end. For high-amp RC use. The bigger housing is the motor/charging end. Smaller housing is th...

XT90 extension connector. Length approx 9". XT90 battery connector at one end, and XT90 motor/Charge connector at other end. 13AWG silicone multi-s...

XT90 Battery connector. For high-amp RC use. This end goes on a Battery pack. Part # XT90-B.

Y-Connector, 11" long. Made with 3-color 22-gauge wire. Enables your RC receiver to power/control two servos or motor speed controllers from one ch...

Y-Connector, 6" long. Made with 3-color 22-gauge wire. Has 1 Male connector, bridging off to 2 Female connectors. Also known as Y-Adapter. Choose c...