Products

404717: 6 volt 3.5Ah rechargeable NiMH battery pack for Paslode portable nail gun. See x-ref fit list below. PASLODE 404400,404717,900400, 900420, ...

44mm (1 3/4" ) Flat wide insulating Shrink wrap. Yellow color. Measured 1 3/4" top-to-bottom when flat. Shrinks down to less than half the origi...

45N1048 : 10.8v 4.4Ah (48Wh) rechargeable Li-ION battery for Lenovo, IBM laptops etc. Compatible Battery part #s: L11L6Y01 L11L6F01 L11L6R01L11M6Y0...

48-11-0080: 9.6volt 2500mAh rechargeable NiMH battery for Milwaukee cordless tools. Replaces Milwaukee 48-11-0080, etc.

48-11-0100 : 2.4 volt 1500mAh rechargeable Ni-Cd battery for Milwaukee Tools. Fits / replaces 6538-1, 6539-1, 6539-6, 6540-1, 6545-6, 6546-1, 6546-...

48-11-0100h: 2.4volt 2200mAh rechargeable Ni-MH battery for Milwaukee. Fits / replaces 6538-1, 6539-1, 6539-6, 6540-1, 6545-6, 6546-1, 6546-6, 654...

48-11-0200: 12.0 volt 2000mAh rechargeable long-life Ni-Cd battery for Milwaukee tools. Fits / replaces 48-11-0140, 48-11-0141, 48-11-0200, 48-11-0...

48-11-1000: 14.4 volt 2000mAh rechargeable NiCd battery for Milwaukee tools. Replaces 48-11-1000, 48-11-1014, 48-11-1024.  Re-charges with your exi...

48-11-1000H : 14.4 volt 3000mAh rechargeable NiMH battery for Milwaukee tools. Replaces 48-11-1000, 48-11-1014, 48-11-1024.  Provides extended oper...

48-11-1900 : 12 volt 2.0Ah rechargeable NiCd battery pack for Milwaukee tools. Replaces battery model #s 48-11-1950, 48-11-1960, 48-11-1967, 48-11-...

48-11-2230:  18VDC 4.0Ah (4000mAh) High-capacity rechargeable Ni-MH battery for Milwaukee Tools, Chicago Pneumatic. Provides exceptional operating...

4AA-A-F : AA Holder for Futaba - goes in RC model. Holds 4 x AA (Alkaline or Rechargeable cells). Dimensions: 2.5" across x 2.2" wide x 0.7" thick....

# 4AAA170 : 4.8 volt 170mAh rechargeable Ni-MH battery pack for SportDog, Dogtra, & Wetland Hunter dog collars. See x-ref model numbers below. ...

4AAAT: Battery Charging Tray - holds 4 x AAA battery cells. Has Tamiya connector. Handy for portable applications requiring 4.8 - 6VDC.

The 4AAcase is a See-thru clamshell case for 4 x AA battery cells. Holds Alkalines, Ni-Cds, Ni-MHs, any AA cells. Snaps open & closed. A must-...

4AAT : 4 x AA battery charging tray. Has Tamiya connector. Cells load in series. Charge 4 NiCd or NiMH cells, or use Alkaline AAs for an instant po...

4BK-3HCCAW: 4.8 volt 2550mAh eneloop pro rechargeable NiMH battery for RC receivers.  These are AA-size cells - same size as typical receiver batte...

4BK-3MCCAW-SPLIT : 4.8 volt 2000mAh AA eneloop Split NiMH custom battery pack for R/C - PRE-CHARGED & READY TO USE. Includes connector to fit S...

4BK-4MCCAW: 4.8 volt 800mAh AAA-size eneloop Ni-MH READY-TO-USE receiver battery packs. Choose Pack shape, and choose Connector or wire leads. Conn...

4CT : 4 x C battery charging tray. Has Tamiya connector. Cells load in series; can be plugged directly into a charger, or used for other DC power a...

4DT : 4 x "D" battery charging tray. Has Tamiya connector. Cells load in series. Charge 4 NiCd or NiMH "D" cells, or use Alkaline cells for an inst...

4EN2000AA-TS-JR : 4.8volt 2000mAh eneloop NiMH battery for TACTIC RC transmitter. PRE-CHARGED & READY TO USE ! Pack size: 4" long, 1.2" wide, 0...