Products

ChgJRT : Adaptive Charging Connector for JR PROPO transmitter batteries that have the small Black T connector. (Found on TX models such as XP-8300,...

Connector Locks : hold male & female servo/battery connectors together. Fit Futaba, JR, HiTEC, SPEkTRUM, AIRTRONICS. $ 0.49 each.

Coolcharger A3 : Smart Charger for 1S, 2S, 3S Li-ION & Li-PO batteries. Can charge batteries from 80mAh (very small)  thru 5000mAh (big). Has 7...

CP-751519: 3.7volt 110mAh Li-PO battery for ESTES nano quad, micro quads. Fits right inside Quad Copters; includes micro white plug.

for Spektrum Transmitter iX12, NX6, NX8, SPMB6000LITX Item No.:CS-SNX600RX Type:Li-ion Capacity: 7800mAh / 28.86Wh Voltage: 3.7v Dim...

CVC8S: Cell Voltage Checker for Li-ION, Li-PO, Li-Fe, Li-Mn batteries (1 thru 8 cells in series). Plugs into balance connector. Displays total pack...

Genuine W.S. Deans 4-pin battery connector.  Heat-resistant housings & gold-plated contacts. Polarized design; ensures correct connecting every...

Genuine W.S. Deans 4-pin connector.  Heat-resistant housings & gold-plated contacts. Polarized design; ensures correct connecting every time. T...

Genuine W.S. Deans 4-pin connectors.  Set of 2 deans 4-pin mating connectors. Heat-resistant housings & gold-plated contacts. Set = 2 connector...

Deans brand Red micro polarized connector set: Set = 2 pcs. These are RED color Deans-style 2-pin connectors, with heat-resistant housings. Pieces ...

Genuine Deans brand 3-pin black battery connector.  Goes on the battery pack. Highest quality connector, for small-to-mid size amperage motor appli...

Genuine Deans brand 3-pin battery connector. Highest quality connector, for small-to-mid size amperage motor applications. Original Deans part # 10...

Genuine Deans brand 3-pin black Charging connector.Has metal pins sticking out of Both sides.Typical Polarity (see picture, going Top to Bottom):Bl...

Digital Miracle Y - Servo Reversing Y adapter for Futaba. Compatible with 4.8volt and 6.0v receiver batteries. Stable digital circuitry. Easy no-dr...

Digital Miracle Y - Servo Reversing Y adapter for JR PROPO, SPEkTRUM, HiTEC, and Airtr. Z equipment. Compatible with 4.8volt and 6.0v receiver batt...

DM-BA: Red T male connector to Banana Plugs. Approx. 8" long. Use for attaching Battery Packs with Red "T" ultra connector to a charger.

DM-EC3B: adapter to convert red "T" connector to EC3 battery end. One end has red ultra "T" male connector; other end has EC3 (blue) battery connec...

DM-EC3M-6: adapter to convert red "T" connector to EC3 battery end. Has 6" of heavy-gauge wire between connectors.  One end has red ultra "T" male ...

DM-XT60M: adapter to convert red "T" connector to XT60 battery connector

DX4.8-HR-3U : 4.8 volt rechargeable batter for SPEkTRUM RC transmitters such as DX9, DX8, DX7s.  Choose capacity: 2500mAh / 2700mAh NiMH.  Replaces...

DX4.8Eneloop : 4.8volt rechargeable eneloop NiMH battery packs for SPEkTRUM DX7s, DX8, & DX9 transmitters.  Replaces original battery SPMB2000N...

EC3 Connector Sets in Bulk for RC. Pkg has 100 connectors total:50 Male blue housings & 100 Gold-plated pins. (Battery end)50 Female blue housi...

EC3 motor/charger end: High-amp Blue connector housing with 2 gold-plated pins. This end goes on the charger wires or motor wires. You would plug a...

EC3-BA: EC3 female connector to Banana Plugs. Approx. 8" long. For attaching battery packs with EC3 (blue) connector to chargers.

EC3B-leads : EC3 battery connector with 6" heavy-gauge wire leads. This typically goes on a battery. Red wire is POS(+) and Black wire is NEG(-).

EC3 Blue battery connector, pre-wired with 8" of heavy 13-gauge red & black wires.

EC3 charger/motor connector with 8" of heavy-gauge red & black wires. Hand-assembled in the USA.

EC3F-DF: adapter for converting EC3 to red "T" Ultra deans style connector. Connect this adapter to a battery with an EC3 connector, and it convert...

EC5 Parallel Adapter: Combines 2 batteries and Doubles the Capacity. Net Voltage remains the same.  Example: Hook up two 7.2 volt batteries, and yo...

EC5 Series Adapter - combines 2 batteries with EC5 connectors and Doubles the voltage. This adapter utilizes heavy-gauge wires.

EC5 battery connector - high-amp blue connector - goes on battery. Includes housing and 2 gold-plated bullet pins.

EC5 connector - motor/charger end. Blue color, high-amp capability. Includes housing & 2 gold-plated pins. You plug your battery pack INTO t...

EC5F-DF: RC hobby adapter for converting blue EC5 to red "T" Ultra style connector. Attach this adapter to a battery with an EC5 connector, and it ...

EFLB6001S : 3.7v 600mAh Li-PO battery, 25C rating, with built-in PCB (circuit board). Includes JST connector. Length: 2 3/8" x 5/8" x 1/4". Weight ...

ELCO female: White Charging Connector for HiTEC Transmitter batteries. Plug your HiTEC battery pack (with the small square White 2-Pin connector - ...

9.6 volt 2000mAh READY-TO-USE NiMH battery for Futaba transmitters. High-capacity, long-life, runs the transmitter for an exceptionally long time. ...

EneloopProTX9.6 : 9.6 volt 2550mAh ENELOOP PRO Ni-MH rechargeable Battery packs for RC transmitters.  Square shape, like in picture.  Dimensions: 4...

EP-5000SC: 1.2 volt 5000mAh rechargeable NiMH Sub-C size cell. Choose plain, or add Solder Tabs for $0.25 per cell (one tab welded to top of batter...

EP700AAH : 1.2 volt 700mAh NiMH battery cell, 2/3 AA size.  Cell dimensions: 1.1" tall x 0.56" diameter  (28mm x 14mm).  Weight = 0.475 ounces.  Av...