• Send Us a Message
    • Skip to content

    Products

    • Ultra T Parallel adapter connector

      $ 6.95

      Ultra T Parallel adapter connector. Same style connectors as "T", Red T, Ultra, Deans, Star. Made with 13AWG flexible silicone wire, approximately ...

      View full details

    • UM-JSTM

      $ 6.95

      UM-JSTM : Adapter to convert battery with Ultra conn. to red JST conn.

    • UM3-8 : 8-cell AA holder, for Futaba, JR PROPO, etc.

      $ 14.95

      UM3-8 : 8-cell AA holder, for Futaba Magnum Jr, etc. Holds 8 x AA batteries (typically Alkaline AA cells); provides up to 12VDC of power. Has 9-vol...

      View full details

    • UP-S6 : Smart Charger for 1S LiPO & LiHV batteries

      $ 36.95

      Features:Six independent ports can be used at the same timeCharges 1S LiPO batteries with MICRO, MX, and mCPX connectors.Three different kinds of b...

      View full details

    • USB-6x1SMCX Smart Charger for 1S 3.7v Li-PO

      $ 35.00
      $ 16.95

      USB-6x1SMCX: USB Charger System for up to 6 x 1S LiPO batteries. Includes USB Smart Charge component and Micro USB adaptive connector. Smart-Charge...

      View full details

    • Wall Charger for SPEkTRUM transmitters

      $ 19.95

      Part # WC-SPEK. Wall Charger for Spektrum transmitters that run on 9.6volt batteries. Plugs into DC jack on back of transmitter. Charger Output is ...

      View full details

    • WC-9521 : Wall Charger for JR & SPEkTRUM transmitters (for 9.6v NiCd/NiMH)

      $ 19.95

      WC-9521 : Wall Charger for JR & SPEkTRUM transmitters (for 9.6v NiCd/NiMH). Input: 100-240VAC (worldwide). Output: 12VDC @ 200mA. Plugs into DC...

      View full details

    • WC-Aurora-9-9x: Wall Charger for HiTEC Aurora 9 & Aurora 9x transmitters

      $ 24.95

      WC-Aurora-9-9x: Wall Charger for HiTEC Aurora 9 & Aurora 9x transmitters. Plugs into round CHG jack on transmitter. Charges NiCd or NiMH batter...

      View full details

    • X4AC PRO : HiTEC programmable 4-channel Charger/Analyzer

      $ 329.95

      HiTEC X4AC PRO: 4-channel 200 Watt AC / 300 Watt DC programmable professional charger & analyzer. Has 4 independent channels. For Li-ION, Li-PO...

      View full details

    • XT30 battery connector

      $ 1.50

      XT30 battery connectors. Sold individually. This connector goes on a battery pack.

    • XT30 Charge Cable - for RC hobby batteries

      $ 6.95

      XT30 Charge Cable - for RC hobby batteries. Use this adapter cable to hook up your XT30 battery to your smart charger. Banana plugs go into smart c...

      View full details

    • XT30 motor / charging connector

      $ 1.50

      XT30 motor / charging connectors. Sold individually.  You would plug a battery pack INTO this connector. These are substantially smaller than the X...

      View full details

    • XT60 set

      $ 6.00
      $ 3.25

      XT60 connector set - 1 battery end and 1 motor-charger end. For high-amp RC use. Include Gold-plated bullet connectors for soldering onto.

    • XT60-B: XT60 battery end

      $ 2.25

      XT60 Battery connector. For high-amp RC use. This end goes on a Battery pack. Part # XT60-B.

    • XT60-BA : XT60 charging adapter

      $ 7.95

      XT60-BA: XT60 female connector to Banana Plugs. Approx. 8" long. Use for attaching battery packs with XT60 (male) connector to a charger.

    • XT60-F

      $ 3.00

      XT60 - high-amp connector for RC applications. This is the Motor / Charger end. Has Gold-plated bullet connections for soldering onto.

    • XT60-parallel

      $ 12.95

      10.9510: adapts 2 x XT60 battery packs to 1 XT60 battery connector. Voltage stays the same. The Capacity (mAh running time) DOUBLES.

    • XT60ChargeCable

      $ 12.00
      $ 6.95

      XT60 Charge Cable with Banana Plugs. Use this to connect your XT60 battery pack to a smart charger. Banana plug ends go into most chargers.

    • XT60F-DF : Adapter to convert XT60 to Red T Ultra connector

      $ 8.95

      XT60F-DF: adapter to convert XT60 battery to red ultra T battery 9Deans style). Pricing is for 1 item. Picture shows both ends of the adapter. If y...

      View full details

    • XT60F-EC3M

      $ 8.95

      XT60F-EC3M: adapter to convert XT60 battery to EC3 battery connector

    • XT60F-FutJM : Adapter to convert XT60 to Futaba J connector.

      $ 9.00
      $ 3.95

      XT60F-FutJM: adapter to convert XT60 battery to red Futaba J connector. If your battery has an XT60 connector on it, this adapter will convert that...

      View full details

    • XT60femaleWired

      $ 4.00

      XT60 female connector with heavy gauge wires - for motor or charger. You plug an XT60 battery pack INTO this connector. Attach to motor or charger.

    • XT60mWired

      $ 3.95

      XT60 battery end with heavy-gauge wire leads

    • XT90 connector set : 1 battery end and 1 motor end

      $ 5.00

      XT90 connector set.  1 Battery end and 1 motor/charge end. For high-amp RC use. The bigger housing is the motor/charging end. Smaller housing is th...

      View full details