Products

DX4.8Eneloop : 4.8volt rechargeable eneloop NiMH battery packs for SPEkTRUM DX7s, DX8, & DX9 transmitters.  Replaces original battery SPMB2000N...

EC3 Connector Sets in Bulk for RC. Pkg has 100 connectors total:50 Male blue housings & 100 Gold-plated pins. (Battery end)50 Female blue housi...

EC3 motor/charger end: High-amp Blue connector housing with 2 gold-plated pins. This end goes on the charger wires or motor wires. You would plug a...

EC3-BA: EC3 female connector to Banana Plugs. Approx. 8" long. For attaching battery packs with EC3 (blue) connector to chargers.

EC3B-leads : EC3 battery connector with 6" heavy-gauge wire leads. This typically goes on a battery. Red wire is POS(+) and Black wire is NEG(-).

EC3 Blue battery connector, pre-wired with 8" of heavy 13-gauge red & black wires.

EC3 charger/motor connector with 8" of heavy-gauge red & black wires. Hand-assembled in the USA.

EC3F-DF: adapter for converting EC3 to red "T" Ultra deans style connector. Connect this adapter to a battery with an EC3 connector, and it convert...

EC5 Parallel Adapter: Combines 2 batteries and Doubles the Capacity. Net Voltage remains the same.  Example: Hook up two 7.2 volt batteries, and yo...

EC5 Series Adapter - combines 2 batteries with EC5 connectors and Doubles the voltage. This adapter utilizes heavy-gauge wires.

EC5 battery connector - high-amp blue connector - goes on battery. Includes housing and 2 gold-plated bullet pins.

EC5 connector - motor/charger end. Blue color, high-amp capability. Includes housing & 2 gold-plated pins. You plug your battery pack INTO t...

EC5F-DF: RC hobby adapter for converting blue EC5 to red "T" Ultra style connector. Attach this adapter to a battery with an EC5 connector, and it ...

EFLB6001S : 3.7v 600mAh Li-PO battery, 25C rating, with built-in PCB (circuit board). Includes JST connector. Length: 2 3/8" x 5/8" x 1/4". Weight ...

ELCO female: White Charging Connector for HiTEC Transmitter batteries. Plug your HiTEC battery pack (with the small square White 2-Pin connector - ...

9.6 volt 2000mAh READY-TO-USE NiMH battery for Futaba transmitters. High-capacity, long-life, runs the transmitter for an exceptionally long time. ...

EneloopProTX9.6 : 9.6 volt 2550mAh ENELOOP PRO Ni-MH rechargeable Battery packs for RC transmitters.  Square shape, like in picture.  Dimensions: 4...

EP-5000SC: 1.2 volt 5000mAh rechargeable NiMH Sub-C size cell. Choose plain, or add Solder Tabs for $0.25 per cell (one tab welded to top of batter...

EP700AAH : 1.2 volt 700mAh NiMH battery cell, 2/3 AA size.  Cell dimensions: 1.1" tall x 0.56" diameter  (28mm x 14mm).  Weight = 0.475 ounces.  Av...

FBC-19B(4): Futaba-brand Wall Charger for 4.8v & 9.6v packs. Plugs into 110-120VAC. Charges 4.8v packs @ 100mA; charges 9.6v packs @ 70mA.

FBC-8B(4): Futaba-brand Wall Charger.  For standard 4.8 volt receiver batteries and 9.6 volt transmitter batteries. Plugs into 110-120VAC. Charges ...

FF-EC3B : Adapter cable. Has Futaba J Female connector at one end, and EC3 (battery) connector at other end. Plugs into SPEkTRUM SPMXC1010 S2100 ch...

FF-JRM: Futaba Female to JR male adaptive connector. Converts Futaba battery pack to JR-SPEkTRUM-HiTEC Battery Pack. Length of wire = approx. 3 inc...

FF-JSTM : Futaba Female connector to JST Male adapter connector

Futaba-style white 2-pin connector with long 10" wire leads - goes on flat (side-by-side) transmitter batteries for Conquest 4, Skysport 4, Attack,...

Futaba Dual-Link Y Adapter. For RC on-board applications. This is a Futaba-style J-Series Dual Heavy Duty Extension; This extension comes from the ...

Futaba female kit: 4 pcs Futaba female connector housings & 12 pins. This "female" connector is what you plug a battery INTO. You will need a c...

Futaba-style Female connector with 12" 3-color wire leads (Black-Red-White). Wire is 22-gauge. Plug your battery packs INTO this connector. Use 3 c...